Has anyone had experience with using a pin on a spinning rod? Just realised I had a decent pin but no rod
Just realized? You did not know that you had it before?
Please stay on the topic. 
|
|
Mainline lbs on your center pin
Started by
Bug_Slinger
, Aug 27 2013 12:31 AM
50 replies to this topic
#21
Hucho Hucho
-
- Active Members
-
- 494 posts
Crappie
Posted 29 August 2013 - 09:39 AM
|
|
#22
w_ boughner
-
- Active Members
-
- 647 posts
Perch
Posted 29 August 2013 - 09:49 AM
I've used a pin on a tod as short as a 8' spinning rod
#23
ChasinTails
-
- Active Members
-
- 1,886 posts
Largemouth Bass
Posted 29 August 2013 - 09:50 AM
ya I found it in my basement guess is was my grandpa'sJust realized? You did not know that you had it before?
Please stay on the topic.
#24
Hucho Hucho
-
- Active Members
-
- 494 posts
Crappie
Posted 29 August 2013 - 10:15 AM
ya I found it in my basement guess is was my grandpa's
JUST GIVING YOU HARD TIME. WHAT BRAND IS IT?
#25
ChasinTails
-
- Active Members
-
- 1,886 posts
Largemouth Bass
Posted 29 August 2013 - 10:26 AM
I'm not sure it doesn't say, I'll look for it o line and paste the link below
#26
ChasinTails
-
- Active Members
-
- 1,886 posts
Largemouth Bass
Posted 29 August 2013 - 10:28 AM
Here, fish fight has the same thinghttp://m223.photobuc...0001-2.jpg.html
#27
coldfeet
-
- Active Members
-
- 354 posts
Crappie
Posted 29 August 2013 - 11:09 PM
Anyone running 8lb promix + 6lb drennan have their mainline break before the leader?
I usually use 4lb with 8lb main and 6lb if using 10lb. Not sure but I think the fluorocarbon has a higher breaking strength than the mono so I use 4lb difference
#28
Swing4Steel
-
- Active Members
-
- 1,523 posts
Swing and float
Posted 30 August 2013 - 06:14 PM
14 pound fireline crystal. Cjr you know you can pop 8 with 6# dren
#30
CJR
-
- Active Members
-
- 1,566 posts
#RNS
Posted 30 August 2013 - 06:17 PM
14 pound fireline crystal. Cjr you know you can pop 8 with 6# dren
I know for some 8lb lines, they will break for sure, but not sure about suffix promix. I run 8lb pline cxx with 6lb drennan and i've never had the main line break before the leader.
#31
DitchWizard
-
- Active Members
-
- 693 posts
Perch
Posted 30 August 2013 - 06:34 PM
There is a post I made a while ago concerning floro breaking strengths on here with some charts but I can't seem to find it ATM.
If I remember correctly seaguar and frog hair being close to their stated breaking strength, with Drennan being sometimes close to twice its stated breaking strength?
W_boughner, Do you use braid in the winter?
#32
buck
-
- Active Members
-
- 867 posts
Perch
Posted 30 August 2013 - 06:51 PM
And to all those with twisting issues swivel above and below your float and you will never have a twisting issue !!
.
#33
Rainbow
-
- Active Members
-
- 1,232 posts
Smallmouth Bass
Posted 30 August 2013 - 07:02 PM
Lines that break way above what's stated on the box tend to be pretty thick compared to other brands with lines of the same stated strength. For example, 8lb drennan has a wider diameter than 12lb rio fluoroflex.
#34
w_ boughner
-
- Active Members
-
- 647 posts
Perch
Posted 31 August 2013 - 06:23 PM
i double swivel can be a issue if your running a slip float for big rivers that have holes 15+ feet but in most Ontario rivers your not more than 9 feet so a double swivel is a easy solution to line twist and if you fish the water often you know your max depth and that's where you put the top swivel .. And in the winder it will help clear your guides of icethe only issue with this is when you move to a deeper hole
#35
fishing89
-
- Active Members
-
- 582 posts
Perch
Posted 03 September 2013 - 05:28 PM
What lb test fluro you guys use for salmon?
#36
Bug_Slinger
-
- Members
-
- 114 posts
Sunfish
Posted 03 September 2013 - 05:49 PM
they were snapping my 6 lbs floro like mad today, fresh fish I guess... I've always used 6lbs for salmon of all shapes & sizes with high % landing ratios, must be all the Fukushima radiation turning them into beasts or something lol
I just spooled the CP with 10 lbs high vis too... if I were to use 8lbs floro, the mainline should hold up,no?
#37
buck
-
- Active Members
-
- 867 posts
Perch
Posted 03 September 2013 - 06:03 PM
i double swivel can be a issue if your running a slip float for big rivers that have holes 15+ feet but in most Ontario rivers your not more than 9 feet so a double swivel is a easy solution to line twist and if you fish the water often you know your max depth and that's where you put the top swivel .. And in the winder it will help clear your guides of ice
.
#38
fishing89
-
- Active Members
-
- 582 posts
Perch
Posted 03 September 2013 - 08:48 PM
I'm switching to 8lb fluro...snapped enough 6lb. These salmon are BEAST !!
Gonna try seaguar abrazx 8lb fluro. Better be worth the $25
Gonna try seaguar abrazx 8lb fluro. Better be worth the $25
#39
ChasinTails
-
- Active Members
-
- 1,886 posts
Largemouth Bass
Posted 03 September 2013 - 08:53 PM
I'm using 8 with no problem for trout however I can't test it on a salmon because none will take my offering, while thenguy next to me is getting one every other cast
#40
fishfearme
-
- Members
-
- 68 posts
Sunfish
Posted 04 September 2013 - 08:26 PM
I run 12lb main line with 8-10lb fluoro for salmon, and 10lb main line with 6-8lb fluoro for steelhead. The past couple of seasons I've been using Suffix Elite and I love the stuff.
|
|
