16 replies to this topic

[GoodenTight]

Hey guys. As some of you were following in another thread, we got a bit deep into studs review. I said I would create a thread on the Kold Kutter after I used em and here we are, here's what you need to know before I do a review:

 

• Simms studs are 1/4 inch, and go for $25USD++ for 10. (approx 3 bucks CAD a pop)
• Kold Kutter screws are 3/8 inch, and go for $25USD for 250.
• Kold Kutter isn't carried in Canada. I ordered off ebay and ship/import/ tax all in $45CAD for 250. ( 18 cents each) more that 15 times cheaper.

Basically, I didn't want to spend 60 bucks for 2x10pack simms studs. That is insane. Which left me to either these sheet metal screws guys talk about (and I could only find them in 1/2inch - too risky for me) or had read some reviews on guys using Kold Kutter before for wading. Kold Kutter is a MotoX ice racing tire stud formally, but I figured they would work well for wading boots.

 

So I got down to business. I have g3s and my dad has freestones. The G3 has a MUCH better jig for studs. 15 per boot. The freestones probably have 30 per boot and you make your own pattern. Meh. Its easier to just see 15 holes and go with a proven pattern. Anyway, see if you can even see the studs. 15 each mirrored L and R.

 

 

G3

 

freestones

 

 

All I did was clean the bases and drill in. I felt like a NASCAR pit guy. Zewm Zewm Zewm. No glue, nothing. The thread on the studs is great and the rubber on the boots is good. All good. Check.

 

Then I hit the water.

 

WHAT A DIFFERENCE

 

These studs are what is up. I was really looking for studs so I am not slipping on banks/mud. But also, was hoping they would perform well wading on rocks/algea. Everything checked out. I couldn't believe the difference these made. 10/10 for sure.

 

I realize these probably wont last for ever. That is why I have a bulk supply of them haha. After one use and sitting now for a week, they have rusted up. I am hoping they bite the ice for winter wading just as well, and I believe they will.

 

 

 

I can let you know how these hold up as the season continues. Winter fishing is whats up.

[PUMP KNOWS]

Thanks for the review .

 

My package should be in this week.

[troutddicted]

Right on - curious to see how they hold up after putting a good beating on them - from what I hear this is the way to go.  Is that your workshop?  What do you build?

[balt0]

Thanks man, going to give them a try once they come in.

[Diana Danger]

Those screws are the cutest! lol  

[Swing4Steel]

Last i.looked royal distributing carried them

[LordMykiss]

most of you ordered so many, could of just sold it to each other and saved each other exchange rate lol

[balt0]

most of you ordered so many, could of just sold it to each other and saved each other exchange rate lol

I should have some soon if anyone needs.

[Shawarma]

Rusted after a week though? That's kind of quick no?

[GoodenTight]

I am sure they will hold up for a while. Simms says holes are usually good to redrill 5 times.

 

Royal Dist does not carry them. They had some generic ice stud only at 1/2 inch. Too deep.

 

Shop is my old mans, I use the shop to make wakeskates, ski work, etc.

[curtis89]

@GoodenTight maybe you could repack these in 25 or 50 packs and sell them online? Not sure if it's worth your hassle but I'm sure you could sell lots of these.

[PUMP KNOWS]

^^^

How much would you price them at?

 

$10/25?  $20/50?

[GoodenTight]

I wouldn't try to take you guys for a ride. If I had extras, I would piece them out for I paid. I actually split my 250 pack with my dad and 3 other buddies and billed them for what their orders worked out @18 cents a piece. Theres people to hustle, and fishing friends don't fall into that category

[PUMP KNOWS]

I'm gonna wait for people to start slipping on the banks and then I'll be slinging that kold klutter crack.

 

 

[DitchWizard]

oddly enough when I set up tires on bikes for ice racing I would use a sold tire and 2" screws. Anything under an inch would pull right out because of the torque  

I don't like many studs, maybe 8 of the lowest profile ones. If I have big studs like these or lots of them in a boot it just acts as a elevated surface when on big rocks and they become incredibly slick. A straight rubber boot bottom actually has better grip on rocks than studs except for when they have ice on them, at least it seems that way on the basketball sized rocks I often wader over.

[DaveC]

Hex head stainless sheet metal screws...i get mine free No rust and great grip. Mine are size 10s 1/2 long. Might have to search or try somewhere like Brofasco.

[BASS BUSTER !]

Hey Dave:
 

Hex head stainless sheet metal screws...i get mine free No rust and great grip. Mine are size 10s 1/2 long. Might have to search or try somewhere like Brofasco.

I do a lot of Woodworking and have a good supply of these on hand. (If we're talking about the same type of Metal Screw) Many sizes are available 3/8" up to about 2-1/2".

Due to the "Hex Head" they are very easy to install and with the "Washer Under Head" have a lot of Holding Power and Depth Control.

Find a socket of the right size and use a Hand Driver (1/4" Drive, Usually) or an Extension in your Power Drill, even a Socket Wrench.

Not sure if I'd drill a Pilot Hole or not, depends on the situation at hand.

They are all Zinc Plated, so Rust is not all that likely. Wear might be. So for Me? No pilot hole due to future replacement.

They are available at all "Big Box" Stores, as below.

Hope this is of some help for Ya'll

Attached Images

• 
• 
•